Steps to Safely Secure Your Roof Following a Fire

10/16/2024 (Permalink)

Roof tarp services after fire damage in Tulsa, OK

Steps To Cover Your Roof With A Tarp

One of the first things fire mitigation experts will do after a fire is to perform emergency services to keep the building from becoming more damaged than it already is. Part of the emergency protocol is often securing the building from trespassers and the elements. If the roof of your commercial building in Tulsa, OK, was damaged by a fire, the roof must be secured before the fire cleanup process can begin. Here are the steps you can expect the professionals to take to cover your roof with a tarp.

1. Measurement

The first step of tarp services is determining how big an area the tarp needs to cover. If damage only occurred on a small portion of the building, there is no need to cover the entire roof. The tarp should extend several inches past the perimeter of the roof damage.

2. Placement

The tarp is placed over the damaged area of the roof. At this point, mitigation technicians verify that the tarp is sufficient to provide shelter from the elements, as it does no good to start fire cleanup inside when an afternoon rain can undo all the work they have done. Once the experts are confident that the tarp provides the right coverage, they can start to secure it to the roof.

3. Attachment

The tarp is pulled taut. If it is blocking any vent or drainage apparatus, the service personnel can adjust the covering so that it is not encumbering the building's established defense against flooding. Once the tarp is in place, it is secured by strapping, and deck screws are placed every 8-12 inches around the perimeter of the tarp.

Before any fire cleanup process or roof repair can begin, what's left of the roof on your commercial building must be protected from further damage. A tarp provides a temporary fix that helps your building withstand additional problems.